Magura MT Series Manuel d'utilisateur Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
16
installatiOn
THE PASSION PEOPLE
www.magura.com
InStallatIon
fit the brake
Important –see basiC safety instruCtiOns, page 14!
Danger of injury on sharp or hot disc brake rotor.
Î
Install the quick release skewer of the front wheel on the right.
The following assembly steps always refer to the front wheel brake, but
they are identical for the rear wheel brake unless otherwise specified.
Installing the adapter
)
Make sure that the contact surfaces of the socket are milled smooth,
free from burrs and paint residues and are coated with corrosion pro-
tection.
)
Make sure that your MAGURA QM-adapter fits the disc brake rotor
(diameter) and standard mounting socket – see table.
)
Make sure that the retaining screws are always coated with fresh
screwlock (medium strength) before installation.
MAGURA QM-adapters are generally fitted with an arrow – when
installed the arrow must point upwards (UP). The label on the QM-
adapter must always be readable from the left side of your bicycle.
The overview shows the correct installation position of the QM-adapt-
er.
[
TD
]
The MAGURA QM-adapter QM40 is screwed directly to the PM sockets
with the brake calliper
[
A2
]
–see
Installing brake calliper, page 17 – the
following installation step is therefore not required for the QM40.
)
Tighten retaining screws
(
1
)
to a tightening torque of max.6 N·m
(53 lbf·in).
[
A1
]
ÎÎ
The arrow on the QM-adapter points upwards – the label can be read
from the left.
Ø disc brake rotor
140 mm (5.5") 160 mm (6") 180 mm (7") 203 mm (8")
Standard mounting socket
[
TD
]
Fork
IS 2000 (ISF)
QM43 (2700 518) QM12 (0722 426) QM5 (0722 321)
PM6"
Direct installation QM40 (2700 515) QM42 (2700 517)
PM7"
Direct installation QM26 (0724 131)
PM8"
Direct installation
Frame
rear triangle
IS 2000 (ISR)
QM12 (0722 426) QM41 (2700 516) QM9 (0722 325)
PM5"
Direct installation QM40 (2700 515) QM28 (0724 496)
PM6"
Direct installation QM40 (2700 515) QM42 (2700 517)
PM7"
Direct installation QM26 (0724 131)
PM8"
Direct installation
COmbinatiOns – Qm-aDapter
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Commentaires sur ces manuels

Pas de commentaire